# Last Modified: Sat Jan 20 10:45:05 2018
#include <tunables/global>
#include <tunables/sys>

/usr/sbin/chronyd (attach_disconnected) {
  #include <abstractions/base>
  #include <abstractions/nameservice>

  capability sys_time,
  capability net_bind_service,
  capability setuid,
  capability setgid,
  capability sys_nice,
  capability sys_resource,
  # for /run/chrony to be created
  capability chown,
  # for hwtimestamp
  capability net_admin,

  /usr/sbin/chronyd mr,

  /etc/chrony/{,**} r,
  /{,var/}run/chronyd.pid w,
  /{,var/}run/chrony/{,*} rw,
  /var/lib/chrony/{,*} r,
  /var/lib/chrony/* w,
  /var/log/chrony/{,*} r,
  /var/log/chrony/* w,

  # Using the “tempcomp” directive gives chronyd the ability to improve
  # the stability and accuracy of the clock by compensating the temperature
  # changes measured by a sensor close to the oscillator.
  @{sys}/class/hwmon/hwmon[0-9]*/temp[0-9]*_input r,

  # Support all paths suggested in the man page (LP: #1771028). Assume these
  # are common use cases; others should be set as local include (see below).
  # Configs using a 'chrony.' prefix like the tempcomp config file example
  /etc/chrony.* r,
  # Example gpsd socket is outside /{,var/}run/chrony/
  /{,var/}run/chrony.tty{,*}.sock rw,
  # To sign replies to MS-SNTP clients by the smbd daemon
  /var/lib/samba/ntp_signd r,
  /var/lib/samba/ntp_signd/{,*} rw,

  # rtc
  /etc/adjtime r,
  /dev/rtc{,[0-9]*} rw,

  # gps devices
  /dev/pps[0-9]* rw,
  /dev/ptp[0-9]* rw,

  # For use with clocks that report via shared memory (e.g. gpsd),
  # you may need to give ntpd access to all of shared memory, though
  # this can be considered dangerous. See https://launchpad.net/bugs/722815
  # for details. To enable, add this to local/usr.sbin.chronyd:
  #     capability ipc_owner,

  # Site-specific additions and overrides. See local/README for details.
  #include <local/usr.sbin.chronyd>
}