/*  vim:expandtab:shiftwidth=2:tabstop=2:smarttab:
 * 
 *  Gearmand client and server library.
 *
 *  Copyright (C) 2011 Data Differential, http://datadifferential.com/
 *  Copyright (C) 2008 Brian Aker, Eric Day
 *  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions are
 *  met:
 *
 *      * Redistributions of source code must retain the above copyright
 *  notice, this list of conditions and the following disclaimer.
 *
 *      * Redistributions in binary form must reproduce the above
 *  copyright notice, this list of conditions and the following disclaimer
 *  in the documentation and/or other materials provided with the
 *  distribution.
 *
 *      * The names of its contributors may not be used to endorse or
 *  promote products derived from this software without specific prior
 *  written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

/**
 * @file
 * @brief Worker Declarations
 */

#pragma once

/** @addtogroup gearman_worker Worker Declarations
 *
 * This is the interface gearman workers should use.
 *
 * @ref main_page_worker "See Main Page for full details."
 * @{
 */

  enum gearman_worker_state_t {
    GEARMAN_WORKER_STATE_START,
    GEARMAN_WORKER_STATE_FUNCTION_SEND,
    GEARMAN_WORKER_STATE_CONNECT,
    GEARMAN_WORKER_STATE_GRAB_JOB_SEND,
    GEARMAN_WORKER_STATE_GRAB_JOB_RECV,
    GEARMAN_WORKER_STATE_PRE_SLEEP
  };

  enum gearman_worker_universal_t {
    GEARMAN_WORKER_WORK_UNIVERSAL_GRAB_JOB,
    GEARMAN_WORKER_WORK_UNIVERSAL_FUNCTION,
    GEARMAN_WORKER_WORK_UNIVERSAL_COMPLETE,
    GEARMAN_WORKER_WORK_UNIVERSAL_FAIL
  };

/**
 * @ingroup gearman_worker
 */
struct gearman_worker_st
{
  struct {
    bool allocated;
    bool non_blocking;
    bool packet_init;
    bool change;
    bool grab_uniq;
    bool grab_all;
    bool timeout_return;
  } options;
  enum gearman_worker_state_t state;
  enum gearman_worker_universal_t work_state;
  uint32_t function_count;
  uint32_t job_count;
  size_t work_result_size;
  void *context;
  gearman_connection_st *con;
  gearman_job_st *job;
  gearman_job_st *job_list;
  struct _worker_function_st *function;
  struct _worker_function_st *function_list;
  struct _worker_function_st *work_function;
  void *work_result;
  struct gearman_universal_st universal;
  gearman_packet_st grab_job;
  gearman_packet_st pre_sleep;
  gearman_job_st *work_job;
};

#ifdef __cplusplus
#define gearman_has_reducer(A) (A) ? static_cast<bool>((A)->reducer.final_fn) : false
#else
#define gearman_has_reducer(A) (A) ? (bool)((A)->reducer.final_fn) : false
#endif

#ifdef __cplusplus
extern "C" {
#endif


/**
 * Initialize a worker structure. Always check the return value even if passing
 * in a pre-allocated structure. Some other initialization may have failed. It
 * is not required to memset() a structure before providing it.
 *
 * @param[in] worker Caller allocated structure, or NULL to allocate one.
 * @return On success, a pointer to the (possibly allocated) structure. On
 *  failure this will be NULL.
 */
GEARMAN_API
gearman_worker_st *gearman_worker_create(gearman_worker_st *worker);

/**
 * Clone a worker structure.
 *
 * @param[in] worker Caller allocated structure, or NULL to allocate one.
 * @param[in] from Structure to use as a source to clone from.
 * @return Same return as gearman_worker_create().
 */
GEARMAN_API
gearman_worker_st *gearman_worker_clone(gearman_worker_st *worker,
                                        const gearman_worker_st *from);

/**
 * Free resources used by a worker structure.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 */
GEARMAN_API
void gearman_worker_free(gearman_worker_st *worker);

/**
 * See gearman_error() for details.
 */
GEARMAN_API
const char *gearman_worker_error(const gearman_worker_st *worker);

/**
 * See gearman_errno() for details.
 */
GEARMAN_API
int gearman_worker_errno(gearman_worker_st *worker);

/**
 * Get options for a worker structure.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @return Options set for the worker structure.
 */
GEARMAN_API
gearman_worker_options_t gearman_worker_options(const gearman_worker_st *worker);

/**
 * Set options for a worker structure.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @param options Available options for worker structures.
 */
GEARMAN_API
void gearman_worker_set_options(gearman_worker_st *worker,
                                gearman_worker_options_t options);

/**
 * Add options for a worker structure.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @param options Available options for worker structures.
 */
GEARMAN_API
void gearman_worker_add_options(gearman_worker_st *worker,
                                gearman_worker_options_t options);

/**
 * Remove options for a worker structure.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @param options Available options for worker structures.
 */
GEARMAN_API
void gearman_worker_remove_options(gearman_worker_st *worker,
                                   gearman_worker_options_t options);

/**
 * See gearman_universal_timeout() for details.
 */
GEARMAN_API
int gearman_worker_timeout(gearman_worker_st *worker);

/**
 * See gearman_universal_set_timeout() for details.
 */
GEARMAN_API
void gearman_worker_set_timeout(gearman_worker_st *worker, int timeout);

/**
 * Get the application context for a worker.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @return Application context that was previously set, or NULL.
 */
GEARMAN_API
void *gearman_worker_context(const gearman_worker_st *worker);

/**
 * Set the application context for a worker.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @param[in] context Application context to set.
 */
GEARMAN_API
void gearman_worker_set_context(gearman_worker_st *worker, void *context);

/**
 * See gearman_set_log_fn() for details.
 */
GEARMAN_API
void gearman_worker_set_log_fn(gearman_worker_st *worker,
                               gearman_log_fn *function, void *context,
                               gearman_verbose_t verbose);

/**
 * See gearman_set_workload_malloc_fn() for details.
 */
GEARMAN_API
void gearman_worker_set_workload_malloc_fn(gearman_worker_st *worker,
                                           gearman_malloc_fn *function,
                                           void *context);

/**
 * Set custom memory free function for workloads. Normally gearman uses the
 * standard system free to free memory used with workloads. The provided
 * function will be used instead.
 *
 * @param[in] gearman Structure previously initialized with gearman_universal_create() or
 *  gearman_clone().
 * @param[in] function Memory free function to use instead of free().
 * @param[in] context Argument to pass into the callback function.
 */
GEARMAN_API
void gearman_worker_set_workload_free_fn(gearman_worker_st *worker,
                                         gearman_free_fn *function,
                                         void *context);

/**
 * Add a job server to a worker. This goes into a list of servers that can be
 * used to run tasks. No socket I/O happens here, it is just added to a list.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @param[in] host Hostname or IP address (IPv4 or IPv6) of the server to add.
 * @param[in] port Port of the server to add.
 * @return Standard gearman return value.
 */
GEARMAN_API
gearman_return_t gearman_worker_add_server(gearman_worker_st *worker,
                                           const char *host, in_port_t port);

/**
 * Add a list of job servers to a worker. The format for the server list is:
 * SERVER[:PORT][,SERVER[:PORT]]...
 * Some examples are:
 * 10.0.0.1,10.0.0.2,10.0.0.3
 * localhost234,jobserver2.domain.com:7003,10.0.0.3
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @param[in] servers Server list described above.
 * @return Standard gearman return value.
 */
GEARMAN_API
gearman_return_t gearman_worker_add_servers(gearman_worker_st *worker,
                                            const char *servers);

/**
 * Remove all servers currently associated with the worker.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 */
GEARMAN_API
void gearman_worker_remove_servers(gearman_worker_st *worker);

/**
 * When in non-blocking I/O mode, wait for activity from one of the servers.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @return Standard gearman return value.
 */
GEARMAN_API
gearman_return_t gearman_worker_wait(gearman_worker_st *worker);

/**
 * Register function with job servers with an optional timeout. The timeout
 * specifies how many seconds the server will wait before marking a job as
 * failed. If timeout is zero, there is no timeout.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @param[in] function_name Function name to register.
 * @param[in] timeout Optional timeout (in seconds) that specifies the maximum
 *  time a job should. This is enforced on the job server. A value of 0 means
 *  an infinite time.
 * @return Standard gearman return value.
 */
GEARMAN_API
gearman_return_t gearman_worker_register(gearman_worker_st *worker,
                                         const char *function_name,
                                         uint32_t timeout);

/**
 * Unregister function with job servers.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @param[in] function_name Function name to unregister.
 * @return Standard gearman return value.
 */
GEARMAN_API
gearman_return_t gearman_worker_unregister(gearman_worker_st *worker,
                                           const char *function_name);

/**
 * Unregister all functions with job servers.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @return Standard gearman return value.
 */
GEARMAN_API
gearman_return_t gearman_worker_unregister_all(gearman_worker_st *worker);

/**
 * Get a job from one of the job servers. This does not used the callback
 * interface below, which means results must be sent back to the job server
 * manually. It is also the responsibility of the caller to free the job once
 * it has been completed.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @param[in] job Caller allocated structure, or NULL to allocate one.
 * @param[out] ret_ptr Standard gearman return value.
 * @return On success, a pointer to the (possibly allocated) structure. On
 *  failure this will be NULL.
 */
GEARMAN_API
gearman_job_st *gearman_worker_grab_job(gearman_worker_st *worker,
                                        gearman_job_st *job,
                                        gearman_return_t *ret_ptr);

/**
 * Free all jobs for a gearman structure.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 */
GEARMAN_API
void gearman_job_free_all(gearman_worker_st *worker);

/**
 * See if a function exists in the server. It will not return
 * true if the function is currently being de-allocated.
 * @param[in] worker gearman_worker_st that will be used.
 * @param[in] function_name Function name for search.
 * @param[in] function_length Length of function name.
 * @return bool
 */
GEARMAN_API
bool gearman_worker_function_exist(gearman_worker_st *worker,
                                   const char *function_name,
                                   size_t function_length);

/**
 * Register and add callback function for worker. To remove functions that have
 * been added, call gearman_worker_unregister() or
 * gearman_worker_unregister_all().
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @param[in] function_name Function name to register.
 * @param[in] timeout Optional timeout (in seconds) that specifies the maximum
 *  time a job should. This is enforced on the job server. A value of 0 means
 *  an infinite time.
 * @param[in] function Function to run when there is a job ready.
 * @param[in] context Argument to pass into the callback function.
 * @return Standard gearman return value.
 */
GEARMAN_API
  gearman_return_t gearman_worker_add_function(gearman_worker_st *worker,
                                               const char *function_name,
                                               uint32_t timeout,
                                               gearman_worker_fn *function,
                                               void *context);

GEARMAN_API
  gearman_return_t gearman_worker_define_function(gearman_worker_st *worker,
                                                  const char *function_name, const size_t function_name_length,
                                                  const gearman_function_t function,
                                                  const uint32_t timeout,
                                                  void *context);

/**
 * Wait for a job and call the appropriate callback function when it gets one.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @return Standard gearman return value.
 */
GEARMAN_API
gearman_return_t gearman_worker_work(gearman_worker_st *worker);

/**
 * Send data to all job servers to see if they echo it back. This is a test
 * function to see if job servers are responding properly.
 *
 * @param[in] worker Structure previously initialized with
 *  gearman_worker_create() or gearman_worker_clone().
 * @param[in] workload The workload to ask the server to echo back.
 * @param[in] workload_size Size of the workload.
 * @return Standard gearman return value.
 */
GEARMAN_API
gearman_return_t gearman_worker_echo(gearman_worker_st *worker,
                                     const void *workload,
                                     size_t workload_size);

GEARMAN_API
  gearman_return_t gearman_worker_set_memory_allocators(gearman_worker_st *,
                                                        gearman_malloc_fn *malloc_fn,
                                                        gearman_free_fn *free_fn,
                                                        gearman_realloc_fn *realloc_fn,
                                                        gearman_calloc_fn *calloc_fn,
                                                        void *context);

GEARMAN_API
bool gearman_worker_set_server_option(gearman_worker_st *self, const char *option_arg, size_t option_arg_size);

GEARMAN_API
void gearman_worker_set_namespace(gearman_worker_st *self, const char *namespace_key, size_t namespace_key_size);

GEARMAN_API
const char *gearman_worker_namespace(gearman_worker_st *self);

GEARMAN_API
  gearman_id_t gearman_worker_shutdown_handle(gearman_worker_st *self);

GEARMAN_API
  gearman_id_t gearman_worker_id(gearman_worker_st *self);

GEARMAN_API
  gearman_return_t gearman_worker_set_identifier(gearman_worker_st *worker,
                                                 const char *id, size_t id_size);

/** @} */

#ifdef __cplusplus
}
#endif